Masters Antique Release Agent
Powder release agent for stamped concrete. It provides an additional accent color that is permanently embedded into the textured surface of the concrete providing a visually attractive antiqued look.
Available in 9 colors.
Packaging :
- Buckets of 10Kg (coverage 60m²)
- Buckets of 5Kg (coverage 30m²)
Antique release agent for stamped concrete
How to use ?
1) Preparing surfaces
On a fresh concrete or on a stamp overlay, the surface must be smooth and perfectly leveled. This powder release is composed of very fine airborne dust particulates. During windy day, you must be particularly attentive to do not stain nearly walls or buildings. If necessary, protect them with plastic or paper sheeting. Protect yourself in wearing dust mask to prevent inhalation.
2) Application
The best tool to apply Masters Antique Release is is with a dry tampico brush about 8 inches wide. Dip this dry brush into the bucket of powder release and fluff it to load the bristles. Then take the brush by the handle and use your wrist to flick the release on the surface in shaking vigorously near the ground. Apply a uniform layer on the entire surface.
When your colour release agent masks the colour of your colour hardener, that's enough. Don’t apply to much release agent, especially with lighter textures.
Begin the stamping carefully. When you begin to remove your stamp, you can have look under to see what you have done. The surface of the powder colour release help determine if you have depressed the stamp completely.
Regardless of the colour you are using, the release will lighten when it has been fully compacted by the stamp.
Warning : And on windy days, the airborne powder can stain nearby buildings, existing concrete flatwork, and landscaping, making it necessary to mask off adjacent areas with plastic or paper sheeting.
- Form
- Powder
- Coverage
- 60sqm/bucket
- VOC's
- None
- Colour
- Available in 10 colours
- Shelf life
- 24 months
- Packaging
- Bucket of 10kg