Water-based penetrating stain
zoom_out_map
chevron_left chevron_right

Masters Water-based Stain

Like acid stains, this new-generation stain (typically a blend of acrylic polymers and pigments) penetrate the concrete to produce permanent color, ranging from translucent to opaque depending the coats.

Order a sample to test

Packaging : 

  • 1 liter = 5 sqm
  • 5 liters = 25 sqm
  • 1L
  • 5L
€20.75 (tax incl.) €20.75 (tax excl.)
Description

Water-based penetrating stain

The key difference between acid stains and water-based stains is that no chemical reaction occurs, so the color is more consistent. This product is also low in VOCs (volatile organic compounds) and safer to apply because it is free of solvents and acids.

You can achieve nearly any color with water-based stains. Unlike acid-based stain, they don't interact with the concrete that you're staining, so the color will stay consistent. Water-based stains are generally easier to apply and cleanup is minimal. However, the stain does adhere to the surface quickly, so fixing a mistake is more challenging.

Good to know 

  • The concrete that you stain must be at least one month old.
  • For garages use an epoxy solution that's especially designed to handle wear and tear from cars and inclement weather.
  • Unsure if your concrete was previously sealed? Pour a cup of water onto it and see if the water beads up. If it does bead up, there's a sealer. If the water is absorbed into the floor, there isn't any sealer.
Data sheet
MDL-1
Form
Liquid
Compositions
Colorant preparation based on polymers in aqueous phase
Coverage
200mL/sqm
pH
7-8
Colour
16 colors
Toxicity
Harmful to ingestion
Inflammability
Non-flammable
Shelf life
12 months
Packaging
1 or 5 liters
You might also like