0 €0.00

Decorative concrete

All products you need to create by yourself you decorative concrete project

Microconcrete, Stamped Concrete, Stenciled Concrete, Stained Concrete, Wall Stamped Concrete, Stone Carpet, etc...

Show Less

Subcategories

Micro-concrete

Micro concrete, otherwise known as micro cement, or "Béton ciré"

An increasingly popular design product.

It is a cement based coating which can be applied thinly (approximately 1-2mm) to a range of different surfaces including tile. With a contemporary look, it is an ideal solution for bathrooms, kitchens, stairs, countertops, floors surfaces inside and out, walls, furnitures…

Stamped Concrete

Stamped concrete for exteriors environments

A large choice of models or patterns, like wood, cobblestone, tiles, stones, etc...

Especially adapted for outside environments, stamped concrete can be realised on fresh concrete or on existing screed. It is adapted for pedestrian or vehicular traffic and suitable for all climatic conditions. Al ser antideslizante, también da excelentes resultados en las zonas de circulación peatonal cercanas a las piscinas.

Stamped Wall

Stamped concrete for walls

A large choice of models and colors

Based on the same concept of the stamped concrete, for the vertical decoration. It's possible to realize vertical overlays with many patterns like wood, brick, stone... on walls, columns, panels, steps, decorative structures and much more. It takes a sophisticated, unique and scenographic appearence.

Stained Concrete

Stained concrete for porous surfaces

A cheap and easy way to realise a decorative concrete

It allows to colour all porous materials such as concrete screeds, anhydrite screeds or others overlays. It is possible to achieve different effects depending on the tool used.

Stenciled concrete

Stenciled concrete on fresh or old concrete

A good solution to renew existing concrete

Stenciled concrete is a low-cost, low-maintenance way to achieve the look of real stone, tile or brick. It has a flat, even surface perfectly suited for pool decks, walkways, driveways, interior flooring and much more.

Masters Stencil Spray Mortar is the ideal solution for renovating sidewalks, pedestrian passages, pool sides... The design of the decorative motif is obtained using special water resistant flooring stencils, while the color is applied by spraying a special colour hardener mixture for concrete floors.

Self-leveling overlay

Self leveling overlay color for indoor use

Easy an quickly application

Decorative Self leveling overlay coloured, especially suitable for large floors areas without lumps and bubbles. Completely liquid, it should be poured or pumped on a regular surface in a minimum of 5 millimeter thickness.

Resin bound

A lovely exterior decorative coating

Easy to apply everywhere in outside environments

Resin bound ("stone carpet") is rapidly becoming popular as an alternative to traditional paving.
It can be used for a wide range of applications such as tree pits, driveways, patios, conservatories, playgrounds, swimming pool surrounds, access ramps, roof terraces, summer houses and balconies.

Industrial floor

Industrial quartz floor

Industrial quartz floor is a high-resistance coating for floors exposed to heavy loads and industrial machinery traffic. It is an essential coating for ramps and entrances to parking lots, shops and warehouses. In addition to high resistance to mechanical stresses, floors with the addition of quartz sand tolerate well the interaction with various chem. It provides for a uniformly textured surface that offers increased traction where required.

Sort by:

View

There are 240 products.

Masters Water-based Stain

Like acid stains, this new-generation stain (typically a blend of acrylic polymers and pigments) penetrate the concrete to produce permanent color, ranging from translucent to opaque depending the coats.
Order a sample to test

Packaging :
1 liter = 5 sqm
5 liters = 25 sqm

€24.90

Details View details

Masters Impregnator

Invisible protection for industrial floors and micro concrete. Masters Impregnator is a two-component water-based filler. It can be used both indoors and outdoors, and is non-film-forming
Packaging:
1kg for approximately 10m² (in 1 layer)
4kg for approximately 40m² (in 1 layer)

€39.34

Details View details

Edging profile 8mm

L shaped edging profile for walls and floors with a narrow visible edge. They are ideal for the clean separation of different surfaces or stone carpet colors.

€8.00

Details View details

Masters Promat T - Penetrating Sealer

Masters Promat T is a penetrating sealer used to protect outside decorative concrete (stamped concrete, stenciled concrete...). It has a matte finish.

€92.86

Details View details

Shoes for walking on concrete

These shoes are essential for walking on inclined ramps, without sinking, in the fresh concrete. Our overshoes are ideal to make stamped, industrial and decorative floors, ramps and to reach to corners and hard to reach spots.

€40.44

XL edging profile 8mm

Super large edging profile for walls and floors with a narrow visible edge. They are ideal for the clean separation of different surfaces or stone carpet colors.
Wide base (45 mm) for better grip on the ground.

€12.60

Details View details

Masters Vitrifier

Bi-component protection product in aqueous phase, specially adapted for industrial paving and other closed supports. It is suitable for indoor and outdoor applications.
Packaging:
1kg for approximately 10m² (in 1 layer)
5kg for approximately 50m² (in 1 layer)

€39.34

Details View details

KRAFT TOOLS - S Touch-up Tool

Heavyweight Convex Jointer
Large at one end, tapered at the other
Produces half round sunken joints

€47.20

Masters Colour Hardener for stamped concrete

Masters Colour Hardener (bag)

Color hardener for stamped and stenciled concrete.

€20.35

Details View details

Pack

Micro concrete tools kit

Micro-topping Tools Kit
High viscosity mixer
Measuring cup
Trowel 20 x 8 cm
Brush
Roller (+ 1 sleeve)
Sponge

€49.50

Vibrating machine for stone carpet

Last items in stock

Vibrating machine specially designed for smoothing pervious concrete and stone carpet. Equipped with a handle for working in a standing position, it is the ideal machine to make your work easier when creating large floors. Smoothing is 2 times faster than manually.
Delivered with 1 handle of Ø44, long. 1.40m

€2,182.80

Trimming tool

Trimming tool to shape stones, bricks... on stamped wall. The trimming tool have a wood handle to which 2 shaped steel points are firmly fixed.

€6.20

Details View details

Showing 217-228 of 240 item(s)