DC Finish Sealer

Protective resin for stamped and stenciled concrete

DC Finish Sealer is a water-based resin for exterior use.

• It provides basic protection for your stamped or textured concrete.
• It acts as a sealant and dust suppressant.
• It is UV resistant and enhances your projects by increasing the effects and nuances.

This is an entry-level product. Its protection is average. For a product with higher performance, please choose Masters Vernis Ecolex.

Instructions for use

The surface to be treated must be clean, neutral, and completely dry. This sealer is odorless and can be easily applied without special protective measures.

1. Apply a first coat of DC Finish after the concrete has dried for at least 48 hours. Apply a thin, even film with a sprayer at a rate of 1 liter per 10 m². Be careful not to apply too much product, as this could create uneven thickness and compromise the final result. Allow to dry for a minimum of 4 to 6 hours before applying a second coat.
2. Allow the second coat to dry for 48 hours before making the surface walkable.
3. Finish by cleaning the tools with water.

Caution: For stamped concrete applied to a fresh screed (8 to 20 cm thick), wait 28 days for the surface to dry completely before applying the second coat of sealer.