Barniz Masters Ecodur
zoom_out_map
chevron_left chevron_right

Masters Barniz PU Ecodur

Masters Varnish PU Ecodur es una resina transparente anti-amarilleo de dos componentes para interior y exterior. Después de la aplicación, forma una película repelente de agua, aceite y productos químicos uniforme.

Disponible en brillo mate, satinado o brillante.


Presentación: Latas de 2 o 4 kg.
Cobertura: 100gr por 1 m2

  • Satín
  • Mate
  • Brillo
  • 0,5 kg
  • 1 kilogramo
  • 2 kilogramos
  • 4 kg
36,00 € (impuestos inc.) 30,00 € (impuestos excl.)
Impuestos incluidos
Descripción

Masters Varnish Ecodur is a polyurethane bi-component varnish. It is based on an aliphatic resin which forms a waterproof membrane after polymerisation.
It can be use for protect all decorative concrete, especially micro-concrete, self-leveling overlays or all kind of concrete.

How to use ?

1. Preparing surfaces
The surface must be clean, dry and free of dust and other substances such as paint, oil, grease, fluorescence, glue, or old sealers.If you have any doubts about the cleanliness of the substrate, it is preferable to perform a light sanding with 120 grit.

2. Product preparation
Masters Varnish Ecodur is bi-component product. Component A (resin) and B (hardener) are packed in two separate containers. You need to prepare a mix before using.
It's necessary to measure with a scale (weight) one part of the B component for three parts of the A component (Ratio1/3).
The two components should be mixed, with a low speed mixer (300rpm) during 2 minutes.

Warning : Prepare only the necessary quantity for one coat. Once mixed, the product can not be preserve for a future use.

3. Application
Masters Varnish Ecodur is applied with roller or brush in two coats.
Depending on the weather conditions, each layer should be applied at 20 hours interval.
Let it dry during 96 hours before allow traffic.

Ficha técnica
MVPUECO
Formar
Bicomponente
Composición
Resina de poliuretano alifático en base acuosa
Cobertura
100gr / m2
COV
Libre de COV: de acuerdo con la Directiva Europea 2004/42 / CE
Efecto
Mate, satinado o brillante
Color
Transparente
Propiedades
Proporción de mezcla A / B: 3/1
Tiempo de secado
Tocar: 20 horas - Lijar: 96 horas
Vida útil
3 horas a 20 ° C
Duracion
24 meses
embalaje
500 g / 1 kg / 2 kg / 4 kg
Utilizar
Afuera y dentro
Adjuntos

TDS - Barniz Masters Ecodur

Barniz de poliuretano bicomponente (base agua)

Descargas (26.4k)