Kit completo de microhormigón - Pro Universal (todas las superficies) - 2m2, 5m2, 10m2
zoom_out_map
chevron_left chevron_right

Kit completo de microhormigón - Pro Universal (todas las superficies) - 2m2, 5m2, 10m2

Destination : EVERYWHERE (kitchen, bathroom, floor, wall, patio...)

Coverage : 2sqm, 5sqm or 10sqm (2 coats included)

  • 2m²
  • 5m²
  • 10m²
  • Satín
  • Mate
  • Brillo
84,00 € (impuestos inc.) 70,00 € (impuestos excl.)
Impuestos incluidos
Descripción

Full kit to suit every surface

Masters micro-concrete (also called Masters Beton Cire) is an ideal product for renovation and resurfacing. It doesn't require to remove old coatings, even on tiles on account of it excellent grip on all new and old supports. It is applied in two layers with only 2mm thickness.
Our micro-concrete is available in 35 colours and allows multiple effects according to application mode.

Interiors, exteriors and facades are beautifully rendered achieving decorative finishes. It can be applied to areas of any size both large and small without the need of any joints, to floors, walls , shelves and kitchen tops, sinks and bathtubs.

Mechanical and physical characteristics

Coverage : About 1kg for 1 sqm for one coat
Granulometry : 0,3 à 0,4 mm
Density : 2,1
Compression resistance : 7 to 12 Mpa (after 2 days), 30 to 35 Mpa (after 28 days)
Flexion resistance : 3 to 5 Mpa (after 2 days), 11 to 12 Mpa (after 28 days)
Mechanicals resistances standards NF EN 196.1

microcement microtopping color chart

Products included

2m² 5m² 10m²
  • Masters Prim Plus (250mL)
  • Masters Micro-concrete (5 kg of powder + 1L of binder)
  • Masters Varnish Ecodur (0,5 kg)
  • Masters Prim Plus (500mL)
  • Marters Micro-concrete (10 kg of powder + 2,5L of binder)
  • Masters Varnish Ecodur (1 kg)
  • Masters Prim Plus (1L)
  • Masters Micro-concrete (20 kg of powder + 5L of binder)
  • Masters Varnish Ecodur (2 kg)
Ficha técnica
KPRO
Composición
Cemento Portland y arenas de sílice + ligante a base de polímeros acrílicos
Cobertura
1 kg por 1 m 2 (para una capa)
COV
Libre de COV: de acuerdo con la Directiva Europea 2004/42 / CE
Efecto
Mate, satinado o brillante
Color
Disponible en 43 colores. Color personalizado bajo demanda
Granulometria
0,2 hasta 0,3 mm
Densidad
2.1
Resistencia a la compresión
De 7 a 12 Mpa (dopo 2 giorni), de 30 a 35 Mpa (dopo 28 giorni)
Resistencia a la flexión
Da 3 a 5 Mpa (dopo 2 giorni), da 11 a 12 Mpa (dopo 28 giorni)
Utilizar
Afuera y dentro
También podría interesarle