Kit complet microbeton - Suprafețe mici și pereți - 2mp, 5mp, 10mp
zoom_out_map
chevron_left chevron_right

Kit complet microbeton - Suprafețe mici și pereți - 2mp, 5mp, 10mp

This kit is especially adapted to walls and small surfaces !

Coverage : 2sqm, 5sqm or 10sqm (two coats included)

  • 2 m²
  • 5 m²
  • 10 m²
  • Satin
74,74 € (inclusiv TVA) 62,28 € (fara TVA)
cu TVA
Descriere

SMALL SURFACES - Full kit (all included)

Masters micro-concrete (also called Masters Beton Cire) is an ideal product for renovation and resurfacing. It doesn't require to remove old coatings, even on tiles on account of it excellent grip on all new and old supports. It is applied in two layers with only 2mm thickness.
Our micro-concrete is available in 35 colours and allows multiple effects according to application mode.

Interiors, exteriors and facades are beautifully rendered achieving decorative finishes. It can be applied to areas of any size both large and small without the need of any joints, to floors, walls , shelves and kitchen tops, sinks and bathtubs.

Mechanical and physical characteristics

Coverage : About 1kg for 1 sqm for one coat
Granulometry : 0,3 à 0,4 mm
Density : 2,1
Compression resistance : 7 to 12 Mpa (after 2 days), 30 to 35 Mpa (after 28 days)
Flexion resistance : 3 to 5 Mpa (after 2 days), 11 to 12 Mpa (after 28 days)
Mechanicals resistances standards NF EN 196.1

microcement microtopping color chart

Products included

2m² 5m² 10m²
  • Masters Prim Plus (250mL)
  • Masters Micro-concrete (5 kg of powder + 1L of binder)
  • Masters Protection (250mL)
  • Masters Enviro Sealer (250mL)
  • Masters Prim Plus (500mL)
  • Marters Micro-concrete (10 kg of powder + 2,5L of binder)
  • Masters Protection (500mL)
  • Masters Enviro Sealer (500mL)
  • Masters Prim Plus (1L)
  • Masters Micro-concrete (20 kg of powder + 5L of binder)
  • Masters Protection (1L)
  • Masters Enviro Sealer (1L)
Fisa tehnica
KPSURF-2
Compoziţie
Ciment Portland și nisipuri de silice + liant pe bază de polimer acrilic
Acoperire
1 kg per 1mp (pentru un singur strat)
COV
COV gratuite - Conform Directivei europene 2004/42 / CE
Efect
Satin
Culoare
Disponibil în 43 de culori. Culoare personalizată la cerere
Granulometrie
0,2 până la 0,3 mm
Densitate
2.1
Rezistența la compresiune
7-12 MPa (după 2 zile), 30 până la 35 MPa (după 28 de zile)
Rezistența la flexiune
3 până la 5 MPa (după 2 zile), 11 până la 12 MPa (după 28 de zile)
Utilizare
Interior
Clientii care au cumparat acest produs au mai cumparat si: