Ștampilă CĂRDICĂ DE IARING
zoom_out_map
chevron_left chevron_right

Ștampilă CĂRDICĂ DE IARING

Această ștampilă oferă o cărămidă tradițională folosită într-un model Herringbone. Modelul Herringbone se referă la un model de coloane cu linii scurte paralele cu toate liniile dintr-o coloană înclinate linii într-un sens în coloane adiacente înclinate în sens invers.

Vecinii tăi nu vor putea să-ți spună betonul ștanțat din realitate.

  • Rigid
  • Flexibil
  • Set de 4
  • Set de 8
167,48 € (inclusiv TVA) 139,57 € (fara TVA)
cu TVA
check On demand
Descriere

DESCRIPTION
These stamps are used to realize a Stamped Concrete on a fresh concrete or on an old screed using a stamping overlay.
Before stamping, the fresh concrete must be first coloured with Masters Colour Hardener to strengthen the surface.
After this step and for avoid your skins not stick the concrete, care must be taken to spray them with a Masters Liquid Release or powdered a Masters Antique Release on the entire surface to be printed.
Note that Masters Antique Release creates a second colour and allows to highlight the patterns.

On an old screed, you must used Masters Stamp Overlay.
In this case, Masters Stamp Overlay must be coloured in the mass during the mixing.
mix.

Our stamps are on sale by unit (rigid or flexible) or by set of 4.
The set of 4 stamps is composed of 3 rigid and one flexible.

The flexible stamp allows to print close to the walls, using the flexibility to make an angle of 90°.

Fisa tehnica
IPHB
Ambalare
Individual sau în seturi de 4 (3 rigide și unul flexibil)
Tip
Rigid sau flexibil
Dimensiuni
90 x 65 cm
Clientii care au cumparat acest produs au mai cumparat si: