Pavimento stencil spray per cemento decorativo
Imballaggio: Secchio da 25Kg + 5 L da legante
Copertura: Da circa 10 m²/paccheto
229 Item Items
Warning: Last items in stock!
|Confezione||Bucket of 25kg powder + can of 5 liters of binder|
|Forma||Powder + binder|
|Composizione||Mix of cement and quartz aggregates and acrylic polymers|
|Consumo indicativo||About 10 sqm by package|
|COV||Free VOC's - According to European Directive 2004/42/CE|
|Colore||Available in 20 colours. Custom colour on demand|
|Data di scadenza||12 months|
|Durezza||7/8 (Mohs scale)|
|Granulometry||0,2 to 0,3 mm|
|Resistenza alla compressione||75 Mpa|
|Masters Spray Mortar is a bi-component overlay system that bonds to all clean concrete surfaces to produce a resistant decorative surface. It can be coloured in mass, applied with a trowel or a spray and must be sealed for a beautiful surface and a long life|
1) Preparing surfaces
The surface must be resistant, clean, hard without cracks. Remove all dust and other substances of old coating who could damage the grip of the product (paint, oil, grease, fluorescence, GLU, sealers...) If you have some little cracks, you can repair it with an Epoxy Resin and insert a fiber mesh into this primer.
To prepare the mix, take a special mixing bucket and put first the liquid binder. Then, add gradually all the powder (already coloured) contained in the bucket. Do not add water. Mix with a professional mixer with a slow speed (<600rpm) during 2 minutes. Once mixed, apply the product with a trowel or with a Spray Gun.
Apply one coat of sealer (water based or solvent based) after 48 hour drying and a second coat after 28 days.