Masters Prim Epox’Easy

Masters Prim Epox’Easy, 1:1 epoxy primer

Packaging: 

• 2L for 10m²
• 8L for 40m²

Advantages

• Its low viscosity makes it very easy to apply.
• Its ratio between the 2 components is simple: 1 to 1 (by volume)
• The bottles are graduated to allow easier dosing, even for small quantities.
• Its flammable formula is completely safe and secure for indoor application.

Manual

Apply a clean, dust-free surface. Mix the two components manually or with a mixer at low speed (300 rpm). Apply in a thin layer using a roller at a rate of 200mL /m². For better adhesion of the mortar, it can be sandblasted.

The primer can be recoated after 2 to 24 hours depending on temperature and humidity. The product is dry when the nail can no longer leave a trace.

Precautions for use:

• Do not apply if temperature is below 12°C
• The pot life of the mixture is maximum 1 hour at 25°C.
• Clean tools with absorbent paper and then with water.